[Mesa-users] too small timesteps - a way to solve it?

Anne Thoul anne.thoul at gmail.com
Tue May 24 14:19:50 UTC 2022


Dear Amadeo,

Thank you.

Have you looked at which criterion defines the timestep when it gets tiny? 
This appears as dt_limit on your screen while you run the code.

You might want to see what happens when you use a higher value for varcontrol_target; the (recommended) default is now 1d-3.
See the docs for changes in r15140:
"The option varcontrol_target is NOT the recommended way to push time resolution to convergence levels. To perform temporal convergence studies, use the new control time_delta_coeff, which acts as a multiplier for timestep limits (analogous to mesh_delta_coeff for spatial resolution).
One strategy for choosing effective timestep limits is to first set varcontrol_target = 1d-3."

You could also use the following for info about what limits the timestep:
"Summary information about the conditions that limited the timestep can be printed at the end of run using the star_job option show_timestep_limit_counts_when_terminate. « 

I see that you have the following debugging lines in your inlist:
"report_all_dt_limits = .true.
  report_why_dt_limits = .true.
    report_solver_dt_info = .true. »
What do these say?

I am not an expert for stars that are that massive, but I am sure others with more knowledge will chime in.

Anne






> Le 24 mai 2022 à 13:00, Amedeo Romagnolo <amedeoromagnolo at gmail.com> a écrit :
> 
> Dear Anne,
> 
> Thanks for pointing this out. My version is 15140 .
> I made a movie with all that's happening in my simulations (I put it in filesharing because it was too big as an attachment).
> Attached the inlist.
> 
> Amedeo
> 
> https://wetransfer.com/downloads/17a09e08cd19ff9b74af3414fdb6da8b20220524105620/d047a9a16bd2965bb27894027e95281920220524105630/82dbc6 <https://wetransfer.com/downloads/17a09e08cd19ff9b74af3414fdb6da8b20220524105620/d047a9a16bd2965bb27894027e95281920220524105630/82dbc6>
> 
> 
> On Tue, 24 May 2022 at 09:37, Anne Thoul <anne.thoul at gmail.com <mailto:anne.thoul at gmail.com>> wrote:
> Hi Amadeo,
> 
> Your message lacks the necessary information that might make it possible for someone to help you, such as inlists, some figures, exact time when the problem starts, mesa version you are using etc.
> 
> Anne 
> 
> > Le 24 mai 2022 à 09:33, Amedeo Romagnolo via Mesa-users <mesa-users at lists.mesastar.org <mailto:mesa-users at lists.mesastar.org>> a écrit :
> > 
> > 
> > Hi all,
> > 
> > I have a problem regarding simulating very massive stars at high metallicity.
> > The problem is that, despite not getting any abrupt end of the simulation, The stellar evolution seems to be stuck in the middle of the main sequence with so little timesteps that nothing ever changes.
> > 
> > So my question would be: is there any way one could compensate for this problem in any possible way?
> > 
> > Cheers,
> > 
> > Amedeo
> > _______________________________________________
> > mesa-users at lists.mesastar.org <mailto:mesa-users at lists.mesastar.org>
> > https://lists.mesastar.org/mailman/listinfo/mesa-users <https://lists.mesastar.org/mailman/listinfo/mesa-users>
> > 
> <inlist_project>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20220524/19dabc77/attachment.htm>


More information about the Mesa-users mailing list