[Mesa-users] Problem with MESA installation
Elisa Rita Garro
elisa_garro at libero.it
Thu Sep 9 15:05:41 UTC 2021
Sorry, but SDK 20.3.2 is not for the OS X 10.12, Sierra; OS X 10.13, High Sierra and OS X 10.14, Mojave? I have a Big Sur 11.5.2 so it is not possible to install it, right?
> Il giorno 09-09-2021, alle ore 17:01, Warrick Ball <W.H.Ball at bham.ac.uk> ha scritto:
>
> Hi Elisa,
>
> Please keep the users' list in CC.
>
> The `build.log` you sent says you tried to install MESA r12778 with MESA SDK 21.4.1 but according to the page I linked, you should use SDK 20.3.2. Did you try building MESA r12778 with SDK 20.3.2? If it failed, please send us that `build.log` file.
>
> Cheers,
> Warrick
>
>
>
> ___________
>
> Warrick Ball
> Postdoc, School of Physics and Astronomy
> University of Birmingham, Edgbaston, Birmingham B15 2TT
> W.H.Ball at bham.ac.uk
> +44 (0)121 414 4552
>
> On Thu, 9 Sep 2021, elisa_garro at libero.it wrote:
>
>> Hi Warrick,
>> Ok. Indeed I have downloaded the MESASDK and MESA version 12778, since the summer school required that. But again the problem was the same.
>>
>>> Il giorno 09-09-2021, alle ore 16:54, Warrick Ball <W.H.Ball at bham.ac.uk> ha scritto:
>>>
>>> Hi Elisa,
>>>
>>> This error is because you're trying to install an older version of MESA with the latest version of the SDK. The easiest solution is to install whichever version of the SDK was the latest when the MESA version you're trying to install was released.
>>>
>>> There's a list on the SDK website here:
>>>
>>> http://www.astro.wisc.edu/~townsend/static.php?ref=mesasdk-old
>>>
>>> Cheers,
>>> Warrick
>>>
>>>
>>>
>>>
>>> ___________
>>>
>>> Warrick Ball
>>> Postdoc, School of Physics and Astronomy
>>> University of Birmingham, Edgbaston, Birmingham B15 2TT
>>> W.H.Ball at bham.ac.uk
>>> +44 (0)121 414 4552
>>>
>>> On Thu, 9 Sep 2021, mesa-users at lists.mesastar.org wrote:
>>>
>>>> Thank you all for helping me! I really appreciate that!
>>>> I have just installed the last version the 21.4.1 since I have a macOS Big Sur Version 11.5.2. However, the problem persists, but now I can share with you the build.log file (attached).
>>>> I followed all your instructions in a detailed way. But in the meantime I’m going to see the YouTube video, thank you for that!
>>>> Best,
>>>> Elisa
>>>>> Il giorno 09-09-2021, alle ore 16:25, Francis Timmes <fxt44 at mac.com> ha scritto:
>>>>>
>>>>> sometimes it can be helpful to follow along a video:
>>>>>
>>>>> Installing MESA on osx - 2020 edition
>>>>>
>>>>> https://youtu.be/mr_A0XrGqNA
>>>>>
>>>>> fxt
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> On Sep 9, 2021, at 7:10 AM, Rob Farmer via Mesa-users <mesa-users at lists.mesastar.org> wrote:
>>>>>>
>>>>>> Okay please stop and do not delete things as mesa logs data during installation (in the build.log file) that would be very helpful at this point to diagnose what is going on.
>>>>>>
>>>>>> Please carefully read the instructions here http://mesa.sourceforge.net/prereqs.html on how to install MESA.
>>>>>>
>>>>>> Please stop using whatever that graphical tool you are trying to use, that is giving you the message about the mesa installation being incomplete. That is not a tool released by the MESA team and we don't support it.
>>>>>>
>>>>>> Instead try installing MESA by just using a terminal and the command line.
>>>>>>
>>>>>> Please read the instructions here http://mesa.sourceforge.net/troubleshooting.html on how to send a useful request for help (that is telling us what mesa version, sdk version and OS you are using as you did not previously mention you are on a
>>>> Mac). If you are on a newer Mac you can not use the older versions of the sdk, so try the newest SDK.
>>>>>>
>>>>>> Rob
>>>>>>
>>>>>>
>>>>>> On Thu, 9 Sept 2021 at 15:29, Elisa Rita Garro <elisa_garro at libero.it> wrote:
>>>>>> Dear Rob,
>>>>>> Yesterday I deleted everything concerning mesa in order to install both mesasdk and mesa again from the beginning today. Now, I downloaded the mesasdk-x86_64-macos-20.11.1.pkg and when I try to install it…the installation does not work saying me:
>>>> "installer encountered an error that prevented installation. Contact the software manufacturer for assistance.” I have install/unistall it a couple of time but now I have a this new problem. So you can imagine that neither the mesa installation
>>>> works.
>>>>>>
>>>>>> I’m without words, I have never had this kind of problems during an installation of a software. It’s very strange!
>>>>>>
>>>>>> Best,
>>>>>> Elisa
>>>>>>
>>>>>>> Il giorno 09-09-2021, alle ore 12:22, Rob Farmer <robert.j.farmer37 at gmail.com> ha scritto:
>>>>>>>
>>>>>>>> I did not understand what means: "You only need to source a file if you edit the file and save the variables in it. If you are just setting the variables in the terminal manually then you do not need to source anything.”
>>>>>>>
>>>>>>> You wrote the line "source ~/.zshenv" but you do not need to do that at that point in time (as you clearly already had set all the variables needed, as you had just echo 'ed them all). Running source ~/.zshenv is only needed if you had edited
>>>> the file ~/.zshenv
>>>>>>>
>>>>>>> You should have a file called build.log inside MESA_DIR. Please attach that.
>>>>>>>
>>>>>>> Rob
>>>>>>>
>>>>>>> On Wed, 8 Sept 2021 at 17:01, Elisa Rita Garro <elisa_garro at libero.it> wrote:
>>>>>>> Ok sorry for that! Well, I think that the MESASDK version may be or the 20.11.1 or the 20.9.1, I have tried with all of Mesa version 12778.
>>>>>>>
>>>>>>> I did not understand what means: "You only need to source a file if you edit the file and save the variables in it. If you are just setting the variables in the terminal manually then you do not need to source anything.”
>>>>>>>
>>>>>>> Best,
>>>>>>> Elisa
>>>>>>>
>>>>>>>> Il giorno 08-09-2021, alle ore 16:50, Rob Farmer <robert.j.farmer37 at gmail.com> ha scritto:
>>>>>>>>
>>>>>>>> Also please keep all messages on mesa-users
>>>>>>>>
>>>>>>>> Rob
>>>>>>>>
>>>>>>>> ---------- Forwarded message ---------
>>>>>>>> From: Rob Farmer <robert.j.farmer37 at gmail.com>
>>>>>>>> Date: Wed, 8 Sept 2021 at 16:50
>>>>>>>> Subject: Re: [Mesa-users] Problem with MESA installation
>>>>>>>> To: Elisa Rita Garro <elisa_garro at libero.it>
>>>>>>>>
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>> Please send text rather than screenshots in the future.
>>>>>>>>
>>>>>>>> It's still not clear what that second screenshot tool is. But the thing to note is that those variables must be set in every terminal that uses mesa, that tool might not be inheriting the variables when it runs.
>>>>>>>>
>>>>>>>> Also the first error is nothing to do with setting the mesa variables, it's hard to say without more information like the mesasdk version but i would guess you have a different mesasdk version as compared to what mesa 12778 was released with. So
>>>> which mesasdk are you using?
>>>>>>>>
>>>>>>>> You only need to source a file if you edit the file and save the variables in it. If you are just setting the variables in the terminal manually then you do not need to source anything.
>>>>>>>>
>>>>>>>> Rob
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, 8 Sept 2021 at 16:24, Elisa Rita Garro <elisa_garro at libero.it> wrote:
>>>>>>>> Dear Rob,
>>>>>>>> Thanks for you reply. Well, I have set those environment variables, but the problem persists. Below the error that I read from the Terminal:
>>>>>>>>
>>>>>>>> COMPILE_CMD ../private/eval_coulomb.f90
>>>>>>>> COMPILE_CMD ../private/reaclib_eval.f90
>>>>>>>> COMPILE_CMD ../private/reaclib_support.f90
>>>>>>>> COMPILE_CMD ../private/pycno.f90
>>>>>>>> ../private/suzuki_tables.f90:551:22:
>>>>>>>>
>>>>>>>> 551 | transfer((/ z'00000000', z'7ff80000' /),1.0_8)
>>>>>>>> | 1
>>>>>>>> Error: BOZ literal constant at (1) cannot appear in an array constructor
>>>>>>>> ../private/suzuki_tables.f90:612:30:
>>>>>>>>
>>>>>>>> 612 | table % data = d_qnan
>>>>>>>> | 1
>>>>>>>> Error: Symbol 'd_qnan' at (1) has no IMPLICIT type
>>>>>>>> COMPILE_CMD ../private/screen5.f90
>>>>>>>> make: *** [suzuki_tables.o] Error 1
>>>>>>>> make: *** Waiting for unfinished jobs....
>>>>>>>>
>>>>>>>> /Users/elisagarro/Software/mesa-r12778/rates/make
>>>>>>>> FAILED
>>>>>>>>
>>>>>>>>
>>>>>>>> /Users/elisagarro/Software/mesa-r12778/rates
>>>>>>>> ./build_and_test FAILED
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> And attached there is the probe (a screenshot) that I set them. However my issues is that maybe I have not the zshenv.<Schermata 2021-09-08 alle 16.23.35.png>
>>>>>>>>> Il giorno 08-09-2021, alle ore 16:20, Rob Farmer <robert.j.farmer37 at gmail.com> ha scritto:
>>>>>>>>>
>>>>>>>>> Hi
>>>>>>>>> I'm not sure what instructions your are following, but the messages are clear you need to set the environment variables MESASDK_ROOT, MESA_DIR, and OMP_NUM_THREADS
>>>>>>>>>
>>>>>>>>> See http://mesa.sourceforge.net/prereqs.html#set-your-environment-variables
>>>>>>>>>
>>>>>>>>> Rob
>>>>>>>>>
>>>>>>>>> On Wed, 8 Sept 2021 at 11:58, Elisa Rita Garro via Mesa-users <mesa-users at lists.mesastar.org> wrote:
>>>>>>>>> Dear MESA-users,
>>>>>>>>> I’m Elisa and I want to install the MESA for a summer school. But, I need your help because I’m unable to fix my problems. I follow your instructions step-by-step but at the end the main problems are:
>>>>>>>>>
>>>>>>>>> MESA SDK error: path to MESA SDK unknown. Please export the "MESASDK_ROOT" environmental variable.
>>>>>>>>> MESA error: path to MESA unknown. Please export the "MESA_DIR" environmental variable.
>>>>>>>>> OpenMP error: Please specify the available number of threads for OpenMP by exporting the "OMP_NUM_THREADS" environmental variable.
>>>>>>>>> Python version: okay
>>>>>>>>> Python error: package "mesa_reader" is NOT installed
>>>>>>>>> Python error: package "mkipp" is NOT installed
>>>>>>>>>
>>>>>>>>> I don’t understand how to resolve them!
>>>>>>>>>
>>>>>>>>> Let me know if you can help.
>>>>>>>>>
>>>>>>>>> Best regards,
>>>>>>>>> Elisa
>>>>>>>>> _______________________________________________
>>>>>>>>> mesa-users at lists.mesastar.org
>>>>>>>>> https://lists.mesastar.org/mailman/listinfo/mesa-users
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> mesa-users at lists.mesastar.org
>>>>>> https://lists.mesastar.org/mailman/listinfo/mesa-users
>>>>>>
>>>>>
>>>> _______________________________________________
>>>> mesa-users at lists.mesastar.org
>>>> https://lists.mesastar.org/mailman/listinfo/mesa-users
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20210909/9e0288c8/attachment.htm>
More information about the Mesa-users
mailing list