[Mesa-users] Test Suite: 1M_pre_ms_to_wd

[Erica A Sawczynec]

Hi Aaron,
	Will this cause the star to evolve to the MS turn-off in 6500 steps regardless of if it should be there or not? I tried changing this value to be bigger and ran into the same issue. Here is a plot I made using TULIPS of the radius as a function of time. You can see the star is at the MS turn-off at 638 Myr. Trying a run with turning that off now!
Thanks,
Erica



> On Nov 18, 2021, at 2:17 PM, Aaron Dotter <aaron.dotter at gmail.com> wrote:
> 
> Hi Erica,
> 
> You have max_model_number = 6500 in the inlist.  Try removing this from the inlist (or set to -1).
> 
> Aaron
> 
> On Thu, Nov 18, 2021 at 3:08 PM Erica A Sawczynec <ericasaw at utexas.edu <mailto:ericasaw at utexas.edu>> wrote:
> Hi All!
> 	I have been tinkering with the 1M_pre_ms_to_wd test suite to try to look at the depth of the convection zone boundary as a function of opacity. I have an altered version that no longer uses the to_end_wd inlist and I set the envelope mass limit so the to_end_agb inlist doesn’t actually go too far past the MS turn-off. I want to finely sample the  MS so I tried turning on the max_years_for_timestep keyword in the debugging section. I set it to something small like 1d5, which feels reasonable for the MS, but I’ve noticed whenever I do this, the test suite evolves a 1M_sol star to the end of the MS in ~600 Myr (which isn’t possible). 
> 	I thought that the max_years_for_timestep would keep the time to evolve to the MS turn-off the same, but increase the sampling of the MS, is that not the case? I even tried increasing the mass model number (up to 65000), thinking maybe that imposed some sort of restriction on the model, but even then the age of the star at the end of the run is way too young. I’ve attached my changed inlist below, note that it will “fail” with the "failed to create end_agb.mod when running inlist_to_end_agb_header” error, but there is still a history.data file where you can look at the results of the run. 
> 	I cannot help but feeling I am missing something silly here, but I just can’t figure out what it is. Any help is greatly appreciated!
> Thanks,
> Erica
> 
> _______________________________________________
> mesa-users at lists.mesastar.org <mailto:mesa-users at lists.mesastar.org>
> https://lists.mesastar.org/mailman/listinfo/mesa-users <https://lists.mesastar.org/mailman/listinfo/mesa-users>
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20211118/2100d652/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 600Myr_turnoff.png
Type: image/png
Size: 8579 bytes
Desc: not available
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20211118/2100d652/attachment.png>