[Mesa-users] Test not terminating at the required phase

[Kimberly Appel]

Hi Evan,

This is the terminal output I get when the run terminates:

stop because log_surface_luminosity <= log_L_lower_limit
   -0.1004671865E+01   -0.1000000000E+01

       5864   7.620999  2.535E+04  -1.712706  -1.712706   0.510344
0.000279   0.000000   0.000000   0.301345   0.000289  61.736875   1139
16
   6.074703   6.327943  -1.786974 -18.571076  -1.239491 -25.392495
0.510065   0.000000   0.700169   0.020075   0.074805  15.622100      6
 0
 1.2547E+10  22.916722  -1.004672   7.719701   4.506902  -5.426933
0.446952   0.276606   0.002056  1.000E+00  9.249E-01  0.000E+00  max
increase
                               rel_E_err       -0.0005495591127248
                       log_rel_run_E_err       -1.9417731348973926

save LOGS/profile7.data for model 5864
save photos/x864 for model 5864
 saved to final.mod
termination code: log_L_lower_limit

        runtime (minutes), retries, backups, steps        2.99        16
      0      5864
__________________________________________________________________________________________________________________________________________________

       step    lg_Tcntr    Teff     lg_LH       lg_Lnuc     Mass
H_rich     H_cntr     N_cntr     Y_surf     X_avg     eta_cntr  zones retry
   lg_dt_yr    lg_Dcntr    lg_R     lg_L3a      lg_Lneu     lg_Mdot
 He_core    He_cntr    O_cntr     Z_surf     Y_avg     gam_cntr  iters bckup
     age_yr    lg_Pcntr    lg_L     lg_gsurf    lg_Psurf    lg_Dsurf
C_core     C_cntr     Ne_cntr    Z_cntr     Z_avg     v_div_cs     dt_limit
__________________________________________________________________________________________________________________________________________________

       5864   7.620999  2.535E+04  -1.712706  -1.712706   0.510344
0.000279   0.000000   0.000000   0.301345   0.000289  61.736875   1139
16
   6.074703   6.327943  -1.786974 -18.571076  -1.239491 -25.392495
0.510065   0.000000   0.700169   0.020075   0.074805  15.622100      6
 0
 1.2547E+10  22.916722  -1.004672   7.719701   4.506902  -5.426933
0.446952   0.276606   0.002056  1.000E+00  9.249E-01  0.000E+00  max
increase
                               rel_E_err       -0.0005495591127248
                       log_rel_run_E_err       -1.9417731348973926

DATE: 2020-06-13
TIME: 14:06:24

finished inlist_to_wd_header

***
***
***
***
***
***

DATE: 2020-06-13
TIME: 14:06:24
finished all inlists for 1M_pre_ms_to_wd
(base) kim at kim-Lenovo-V130-15IKB:~/1M/1M_pre_ms_to_wd_COPY$

I increased the maximum number of models to run but that did not help - the
test does not get past the AGB stage, i.e., it never reaches the white
dwarf stage. I did set  log_L_lower_limit = -1 in my the model
(inlist_to_wd) but still, that also did not help. Also, my LOGS folder is
empty. I am really worried about that.

Kind regards,
Kim

On Thu, Jun 11, 2020 at 7:35 PM Evan Bauer <ebauer at physics.ucsb.edu> wrote:

> Hi Kim,
>
> Can you send the terminal output that you get when the run terminates?
> That should tell us what stopping condition the run has reached.
>
> Cheers,
> Evan
>
>
> > On Jun 10, 2020, at 1:46 AM, Kimberly Appel via Mesa-users <
> mesa-users at lists.mesastar.org> wrote:
> >
> > Hi, I am using a Lenovo-V130-15IKB laptop. My operating system is
> Ubuntu. The version of MESA I am using is r12778 and the version of MESA
> SDK I am using is x86_64-Linux-20.3.2.
> >
> > So, I am trying to run a 1Msun star model from the pre-main sequence to
> the white dwarf phase but the test is not terminating when the log of the
> surface luminosity drops below -1 as it should. Instead, it terminates at
> around the end of the thermally pulsing AGB phase (I think) when the log of
> the surface luminosity is around 3.5. I am not sure what I am missing? I
> set  log_L_lower_limit = -1 in the inlist_project file.
> >
> > I have attached the inlist_to_wd, inlist_pgstar, history_columns.list
> files and a photo. Please let me know if you need additional files.
> >
> > KInd regards,
> > Kim.
> >
> > <inlist_to_wd><inlist_pgstar><history_columns.list><HR
> diagram.png>_______________________________________________
> > mesa-users at lists.mesastar.org
> > https://lists.mesastar.org/mailman/listinfo/mesa-users
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20200613/a73b3eb8/attachment.htm>