[Mesa-users] Pre-Correction Frequencies

Dennis Stello dennis.stello at sydney.edu.au
Wed Dec 23 06:34:27 EST 2020


Hi Erica,

w/o having looked at your attachments (except the plots) my guess is 
that you found too different models in the two cases (Kjeldsen vs 
Ball).  The (pre-corrected) model found using Ball is clearly further 
from the 'best' model (its density is further from the observed) but the 
correction takes care of that.

However, if by 'look a little strange' you mean that the correction goes 
in the 'wrong direction', then it might be because you are not limiting 
the fitting coefficients.
I recall seeing similar issues when using the Kjeldsen correction (in a 
MESA simplex fit) for some stars.

But perhaps Warrick can chip in as well.

Best
Dennis/

On 23/12/2020 15:08, Erica Sawczynec wrote:
> Hi all!
>         I have a few questions about the frequency output in the 
> simplex_results.data file. I am trying to make an echelle diagram that 
> shows the frequencies before and after correction from the best fit 
> MESA model. When I use the Kjeldsen correction I am able to plot 
> l0_freq_# and get the results I expect, frequencies that lean slightly 
> to the right of the input frequencies, but when I use the Ball & Gizon 
> correction the uncorrected frequencies look a little strange. I’ve 
> attached an image below that demonstrates what I mean.
>
> So I just wanted to be sure anything labeled l(0,1,2)_freq_# is mean 
> to be the original output model frequency before correction and 
> l(0,1,2)_freq_corr_# is meant to be the frequency after using either 
> the Kjeldsen or Ball & Gizon correction. If that is true, I was 
> wondering why the Ball & Gizon pre-corrected frequencies look like 
> that? If not, what is the proper column I should be using to plot the 
> uncorrected model frequencies?
>
> I’ve also attached my inlist and simplex_results.data file below, let 
> me know if there is anything else I can provide that would be useful!
> Thanks,
> Erica
>
>
> _______________________________________________
> mesa-users at lists.mesastar.org
> https://lists.mesastar.org/mailman/listinfo/mesa-users 
> <https://lists.mesastar.org/mailman/listinfo/mesa-users>
>

-- 
DENNIS STELLO | Associate Professor
School of Physics | Faculty of Science

UNIVERSITY OF NEW SOUTH WALES
Rm136, K15 | University of New South Wales | NSW | 2052
T +61 2 9065 1334  | F +61 2 9385 6060
E d.stello at unsw.edu.au  | W http://www.physics.usyd.edu.au/~stello/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20201223/1b97f055/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: kjeld_v_ball.png
Type: image/png
Size: 100695 bytes
Desc: not available
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20201223/1b97f055/attachment.png>


More information about the Mesa-users mailing list