[mesa-users] Inlist issue

Yevgeni Kissin jenya.kissin at gmail.com
Thu Jul 20 19:07:33 EDT 2017


Hi Frank,

Thank you for responding.

Is it rotation that triggers an issue with the ZAMS flag?

I set up accretion on a pre-MS 3M_o core. I then choose the model closest
in mass to what I
am after and restart from the corresponding photo. I used this setup
numerous times before,
but this is the first time I attempt to include rotation.

I figured I don't want to include rotation in the pre-MS model, since I am
looking for a certain rate
on the ZAMS (which is shortly after the first model I restart from - the
model relaxes quickly).

Thank you,

Yevgeni.

On 20 July 2017 at 15:02, Frank Timmes <fxt44 at mac.com> wrote:

> inlist_massive_star creates a pre-main sequence model
>
>       create_pre_main_sequence_model = .true.
>
> rather than load a previous model. in such cases it can be useful
> to turn on rotation when the pre-ms model is near zams. for example,
>
>       new_rotation_flag = .true.
>       change_rotation_flag = .false.                 ! rotation off until
> near zams
>       near_zams_relax_omega_div_omega_crit = .true.  ! true to turn on
> rotation at zams
>       num_steps_to_relax_rotation = 100              ! use this many steps
> in relaxing
>       new_omega_div_omega_crit = 0.10d0
>
> explore http://mesa.sourceforge.net/star_job_defaults.html#
> rotation_controls
> to find the relevant controls for omega instead of the omega_div_omega_crit
> used in the above example.
>
> fxt
>
>
>
>
> > On Jul 20, 2017, at 10:26 AM, Yevgeni Kissin <jenya.kissin at gmail.com>
> wrote:
> >
> > Hi everyone,
> >
> > I am attempting to modify an inlist that has worked for me numerous
> times, by adding controls for
> > rotation and resulting mixing. Once I do so, all the controls below the
> mixing values fail to be
> > registered (i.e. their values revert to defaults).
> >
> > I am including the inlist here, and I enclosed the new values in '!!!!'
> (should be evident).
> >
> > I tried moving the new values to the bottom of the inlist, but when I
> run I get a series of messages:
> > " s% omega(k)        ###     NaN "
> > which I believe is due to me setting a rotation rate, without activating
> mixing (hence the control
> > command does not get recognized).
> >
> > Is there a limit to the length of the inlist, or what could be the issue
> here?
> >
> > I will point out that this inlist is used to restart from an image of a
> 3M_o pre-MS model which experienced
> > accretion up to 13M_o (hence it's a 13M_o ZAMS model).
> >
> > Thank you very much.
> >
> > Yevgeni.
> > <inlist_massive_star>---------------------------------------
> ---------------------------------------
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot______
> _________________________________________
> > mesa-users mailing list
> > mesa-users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/mesa-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20170720/80621928/attachment.html>
-------------- next part --------------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
-------------- next part --------------
_______________________________________________
mesa-users mailing list
mesa-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mesa-users


More information about the Mesa-users mailing list