[mesa-users] run gyre only

Thu Jan 19 13:35:15 EST 2017

Sorry, not 'UMH', it should be 'UHZ' (micro Hz) :-P

Sincerely,
Jing

On Thu, Jan 19, 2017 at 10:33 AM, Jing Luan <jingluan.xw at gmail.com> wrote:

> Hi Rich,
>
> A quick question about gyre. I specify the unit for frequency to be 'UMH'
> in gyre.in. What unit is omega in in the output files, mode.n-XXXX.txt
> please? Is it radian/second please? Thank you very much :-)
>
> Sincerely,
> Jing
>
> On Thu, Jan 19, 2017 at 9:34 AM, Jing Luan <jingluan.xw at gmail.com> wrote:
>
>> Thank you so much, Rich. Now it works :-D
>>
>> Sincerely,
>> Jing
>>
>> On Thu, Jan 19, 2017 at 9:28 AM, RICHARD H D TOWNSEND <
>> townsend at astro.wisc.edu> wrote:
>>
>>> Hi Jing —
>>>
>>> It looks like the quotes around the ‘model.mesa' filename are messed up.
>>> You should replace them with single-quote characters, not an open-and-close
>>> pair.
>>>
>>> cheers,
>>>
>>> Rich
>>>
>>> > On Jan 19, 2017, at 9:26 AM, Jing Luan <jingluan.xw at gmail.com> wrote:
>>> >
>>> > Hi Rich,
>>> >
>>> > Now it cannot recognize 'model.mesa'. I attach my inlist. The err
>>> message reads:
>>> >
>>> > At line 514 of file ../private/star_job_ctrls_io.f90 (unit = 29, file
>>> = 'inlist_wd_surf_at_tau_1m4')
>>> >
>>> > Fortran runtime error: Cannot match namelist object name ‘model.mesa'
>>> >
>>> >
>>> >
>>> > Thank you very much :-)
>>> >
>>> >
>>> >
>>> > Sincerely,
>>> >
>>> > Jing
>>> >
>>> >
>>> > On Thu, Jan 19, 2017 at 9:17 AM, RICHARD H D TOWNSEND <
>>> townsend at astro.wisc.edu> wrote:
>>> > OK, try using these parameters instead:
>>> >
>>> > &star
>>> >   save_pulsation_info_when_terminate = .true.
>>> >   save_pulsation_info_filename = ‘model.mesa'
>>> > /
>>> >
>>> > cheers,
>>> >
>>> > Rich
>>> >
>>> > > On Jan 19, 2017, at 9:09 AM, Jing Luan <jingluan.xw at gmail.com>
>>> wrote:
>>> > >
>>> > > Hi Rich,
>>> > >
>>> > > I use r8118. Thank you very much :-)
>>> > >
>>> > > Sincerely,
>>> > > Jing
>>> > >
>>> > > On Thu, Jan 19, 2017 at 9:05 AM, RICHARD H D TOWNSEND <
>>> townsend at astro.wisc.edu> wrote:
>>> > > Hi Jing —
>>> > >
>>> > > What version of MESA are you running? The syntax changed a year or
>>> two ago.
>>> > >
>>> > > cheers,
>>> > >
>>> > > Rich
>>> > >
>>> > > PS Please keep the mesa-users list in the replies — we want other
>>> people to be able to see our conversation!
>>> > >
>>> > > > On Jan 19, 2017, at 9:03 AM, Jing Luan <jingluan.xw at gmail.com>
>>> wrote:
>>> > > >
>>> > > > Hi Rich,
>>> > > >
>>> > > > Thank you :-) But it report the error that
>>> > > >
>>> > > > At line 514 of file ../private/star_job_ctrls_io.f90 (unit = 29,
>>> file = 'inlist_wd_surf_at_tau_1m4')
>>> > > > Fortran runtime error: Cannot match namelist object name
>>> save_pulse_data_when_terminate
>>> > > >
>>> > > > Do I need to add something else please? Thank you very much :-)
>>> > > >
>>> > > > Sincerely,
>>> > > > Jing
>>> > > >
>>> > > > On Wed, Jan 18, 2017 at 3:36 PM, RICHARD H D TOWNSEND <
>>> townsend at astro.wisc.edu> wrote:
>>> > > > Hi Jing —
>>> > > >
>>> > > > To obtain a model file that GYRE can read, you need to use the
>>> following flags:
>>> > > >
>>> > > > &star
>>> > > >    save_pulse_data_when_terminate = .true.
>>> > > >    save_pulse_data_filename = ‘model.mesa'
>>> > > > /
>>> > > >
>>> > > > &controls
>>> > > >    pulse_info_format = ‘GYRE'
>>> > > > /
>>> > > >
>>> > > > cheers,
>>> > > >
>>> > > > Rich
>>> > > >
>>> > > > > On Jan 18, 2017, at 3:26 PM, Jing Luan <jingluan.xw at gmail.com>
>>> wrote:
>>> > > > >
>>> > > > > Hi Robert and mesa users,
>>> > > > >
>>> > > > > Is there a way to convert a mesa model into the format that gyre
>>> could use as an input model please? I compare a .mod file created by mesa
>>> and the spb.mesa (the input model used by gyre). Their formats are
>>> different, and the columns do not correspond to the same physical quantity.
>>> > > > >
>>> > > > > I attach my .mod file and spb.mesa.
>>> > > > >
>>> > > > > Many thanks!
>>> > > > >
>>> > > > > Sincerely,
>>> > > > > Jing
>>> > > > >
>>> > > > >
>>> > > > >
>>> > > > > On Wed, Jan 18, 2017 at 12:55 PM, Robert Farmer <
>>> rjfarmer at asu.edu> wrote:
>>> > > > > Hi
>>> > > > >
>>> > > > > > how to run gyre alone, it is not clear what would be the
>>> proper directory under mesa to do it.
>>> > > > >
>>> > > > > Running gyre on its own doesn't need mesa, look in the
>>> $MESA_DIR/gyre/gyre folder and then in the test directory for ideas. This
>>> is just the gyre source code folder you can download from rich's site.
>>> > > > >
>>> > > > > Further questions about running gyre on its own should go to
>>> http://www.astro.wisc.edu/~townsend/gyre-forums/
>>> > > > >
>>> > > > > You may also want to look over the material here
>>> http://mesastar.org/teaching-materials/2016-mesa-summer-school/gautschy
>>> (specifically lab1)
>>> > > > >
>>> > > > > Rob
>>> > > > >
>>> > > > > On Wed, Jan 18, 2017 at 12:43 PM, Jing Luan <
>>> jingluan.xw at gmail.com> wrote:
>>> > > > > Dear mesa users,
>>> > > > >
>>> > > > > Is there a dir inside mesa/star/test_suite showing how to run
>>> gyre WITHOUT running mesa (or in other words, without evolving the star)
>>> please?
>>> > > > >
>>> > > > > I find pulse_gyre and example_astero, both of which are running
>>> mesa & gyre together. But I just want gyre to read in a mesa model (which I
>>> already built using mesa) and calculate the eigen frequency/function.
>>> > > > >
>>> > > > > Although it is clear in gyre's website (
>>> https://bitbucket.org/rhdtownsend/gyre/wiki/Running%20GYRE) how to run
>>> gyre alone, it is not clear what would be the proper directory under mesa
>>> to do it. I do not want to install gyre outside mesa.
>>> > > > >
>>> > > > > Many thanks :-D
>>> > > > >
>>> > > > > Sincerely,
>>> > > > > Jing
>>> > > > >
>>> > > > > ------------------------------------------------------------
>>> ------------------
>>> > > > > Check out the vibrant tech community on one of the world's most
>>> > > > > engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>> > > > > _______________________________________________
>>> > > > > mesa-users mailing list
>>> > > > > mesa-users at lists.sourceforge.net
>>> > > > > https://lists.sourceforge.net/lists/listinfo/mesa-users
>>> > > > >
>>> > > > >
>>> > > > >
>>> > > > > <spb.mesa><0.6M-diffused-ML2-0.5-tau=1d-3-1560.mod>---------
>>> ---------------------------------------------------------------------
>>> > > > > Check out the vibrant tech community on one of the world's most
>>> > > > > engaging tech sites, SlashDot.org!
>>> http://sdm.link/slashdot_______________________________________________
>>> > > > > mesa-users mailing list
>>> > > > > mesa-users at lists.sourceforge.net
>>> > > > > https://lists.sourceforge.net/lists/listinfo/mesa-users
>>> > > >
>>> > > >
>>> > >
>>> > >
>>> >
>>> >
>>> > <inlist_wd_surf_at_tau_1m4><inlist>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20170119/2652808a/attachment.html>