[mesa-users] run gyre only

Thu Jan 19 13:33:29 EST 2017

Hi Rich,

A quick question about gyre. I specify the unit for frequency to be 'UMH'
in gyre.in. What unit is omega in in the output files, mode.n-XXXX.txt
please? Is it radian/second please? Thank you very much :-)

Sincerely,
Jing

On Thu, Jan 19, 2017 at 9:34 AM, Jing Luan <jingluan.xw at gmail.com> wrote:

> Thank you so much, Rich. Now it works :-D
>
> Sincerely,
> Jing
>
> On Thu, Jan 19, 2017 at 9:28 AM, RICHARD H D TOWNSEND <
> townsend at astro.wisc.edu> wrote:
>
>> Hi Jing —
>>
>> It looks like the quotes around the ‘model.mesa' filename are messed up.
>> You should replace them with single-quote characters, not an open-and-close
>> pair.
>>
>> cheers,
>>
>> Rich
>>
>> > On Jan 19, 2017, at 9:26 AM, Jing Luan <jingluan.xw at gmail.com> wrote:
>> >
>> > Hi Rich,
>> >
>> > Now it cannot recognize 'model.mesa'. I attach my inlist. The err
>> message reads:
>> >
>> > At line 514 of file ../private/star_job_ctrls_io.f90 (unit = 29, file
>> = 'inlist_wd_surf_at_tau_1m4')
>> >
>> > Fortran runtime error: Cannot match namelist object name ‘model.mesa'
>> >
>> >
>> >
>> > Thank you very much :-)
>> >
>> >
>> >
>> > Sincerely,
>> >
>> > Jing
>> >
>> >
>> > On Thu, Jan 19, 2017 at 9:17 AM, RICHARD H D TOWNSEND <
>> townsend at astro.wisc.edu> wrote:
>> > OK, try using these parameters instead:
>> >
>> > &star
>> >   save_pulsation_info_when_terminate = .true.
>> >   save_pulsation_info_filename = ‘model.mesa'
>> > /
>> >
>> > cheers,
>> >
>> > Rich
>> >
>> > > On Jan 19, 2017, at 9:09 AM, Jing Luan <jingluan.xw at gmail.com> wrote:
>> > >
>> > > Hi Rich,
>> > >
>> > > I use r8118. Thank you very much :-)
>> > >
>> > > Sincerely,
>> > > Jing
>> > >
>> > > On Thu, Jan 19, 2017 at 9:05 AM, RICHARD H D TOWNSEND <
>> townsend at astro.wisc.edu> wrote:
>> > > Hi Jing —
>> > >
>> > > What version of MESA are you running? The syntax changed a year or
>> two ago.
>> > >
>> > > cheers,
>> > >
>> > > Rich
>> > >
>> > > PS Please keep the mesa-users list in the replies — we want other
>> people to be able to see our conversation!
>> > >
>> > > > On Jan 19, 2017, at 9:03 AM, Jing Luan <jingluan.xw at gmail.com>
>> wrote:
>> > > >
>> > > > Hi Rich,
>> > > >
>> > > > Thank you :-) But it report the error that
>> > > >
>> > > > At line 514 of file ../private/star_job_ctrls_io.f90 (unit = 29,
>> file = 'inlist_wd_surf_at_tau_1m4')
>> > > > Fortran runtime error: Cannot match namelist object name
>> save_pulse_data_when_terminate
>> > > >
>> > > > Do I need to add something else please? Thank you very much :-)
>> > > >
>> > > > Sincerely,
>> > > > Jing
>> > > >
>> > > > On Wed, Jan 18, 2017 at 3:36 PM, RICHARD H D TOWNSEND <
>> townsend at astro.wisc.edu> wrote:
>> > > > Hi Jing —
>> > > >
>> > > > To obtain a model file that GYRE can read, you need to use the
>> following flags:
>> > > >
>> > > > &star
>> > > >    save_pulse_data_when_terminate = .true.
>> > > >    save_pulse_data_filename = ‘model.mesa'
>> > > > /
>> > > >
>> > > > &controls
>> > > >    pulse_info_format = ‘GYRE'
>> > > > /
>> > > >
>> > > > cheers,
>> > > >
>> > > > Rich
>> > > >
>> > > > > On Jan 18, 2017, at 3:26 PM, Jing Luan <jingluan.xw at gmail.com>
>> wrote:
>> > > > >
>> > > > > Hi Robert and mesa users,
>> > > > >
>> > > > > Is there a way to convert a mesa model into the format that gyre
>> could use as an input model please? I compare a .mod file created by mesa
>> and the spb.mesa (the input model used by gyre). Their formats are
>> different, and the columns do not correspond to the same physical quantity.
>> > > > >
>> > > > > I attach my .mod file and spb.mesa.
>> > > > >
>> > > > > Many thanks!
>> > > > >
>> > > > > Sincerely,
>> > > > > Jing
>> > > > >
>> > > > >
>> > > > >
>> > > > > On Wed, Jan 18, 2017 at 12:55 PM, Robert Farmer <rjfarmer at asu.edu>
>> wrote:
>> > > > > Hi
>> > > > >
>> > > > > > how to run gyre alone, it is not clear what would be the proper
>> directory under mesa to do it.
>> > > > >
>> > > > > Running gyre on its own doesn't need mesa, look in the
>> $MESA_DIR/gyre/gyre folder and then in the test directory for ideas. This
>> is just the gyre source code folder you can download from rich's site.
>> > > > >
>> > > > > Further questions about running gyre on its own should go to
>> http://www.astro.wisc.edu/~townsend/gyre-forums/
>> > > > >
>> > > > > You may also want to look over the material here
>> http://mesastar.org/teaching-materials/2016-mesa-summer-school/gautschy
>> (specifically lab1)
>> > > > >
>> > > > > Rob
>> > > > >
>> > > > > On Wed, Jan 18, 2017 at 12:43 PM, Jing Luan <
>> jingluan.xw at gmail.com> wrote:
>> > > > > Dear mesa users,
>> > > > >
>> > > > > Is there a dir inside mesa/star/test_suite showing how to run
>> gyre WITHOUT running mesa (or in other words, without evolving the star)
>> please?
>> > > > >
>> > > > > I find pulse_gyre and example_astero, both of which are running
>> mesa & gyre together. But I just want gyre to read in a mesa model (which I
>> already built using mesa) and calculate the eigen frequency/function.
>> > > > >
>> > > > > Although it is clear in gyre's website (
>> https://bitbucket.org/rhdtownsend/gyre/wiki/Running%20GYRE) how to run
>> gyre alone, it is not clear what would be the proper directory under mesa
>> to do it. I do not want to install gyre outside mesa.
>> > > > >
>> > > > > Many thanks :-D
>> > > > >
>> > > > > Sincerely,
>> > > > > Jing
>> > > > >
>> > > > > ------------------------------------------------------------
>> ------------------
>> > > > > Check out the vibrant tech community on one of the world's most
>> > > > > engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> > > > > _______________________________________________
>> > > > > mesa-users mailing list
>> > > > > mesa-users at lists.sourceforge.net
>> > > > > https://lists.sourceforge.net/lists/listinfo/mesa-users
>> > > > >
>> > > > >
>> > > > >
>> > > > > <spb.mesa><0.6M-diffused-ML2-0.5-tau=1d-3-1560.mod>---------
>> ---------------------------------------------------------------------
>> > > > > Check out the vibrant tech community on one of the world's most
>> > > > > engaging tech sites, SlashDot.org! http://sdm.link/slashdot______
>> _________________________________________
>> > > > > mesa-users mailing list
>> > > > > mesa-users at lists.sourceforge.net
>> > > > > https://lists.sourceforge.net/lists/listinfo/mesa-users
>> > > >
>> > > >
>> > >
>> > >
>> >
>> >
>> > <inlist_wd_surf_at_tau_1m4><inlist>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20170119/5202aa34/attachment.html>