[mesa-users] make naked WD models

[chenhl]

Hi Francis,

Thanks for your suggestion.

Indeed I found some useful and interesting messages.

Best wishes,
Hailiang

On Thu, Sep 29, 2016 at 12:47 PM, Francis Timmes <fxt44 at mac.com> wrote:

> hi hailiang,
>
> there are ~10,000 messages in the mailing list archives.
> sometimes searching the past can yield solutions for the present.
>
> start from
>
> https://sourceforge.net/p/mesa/mailman/search/?mail_list=mesa-users
>
> and search for, say, "pure carbon". the first thread shown in the search
> results
> between alfred, bill, and josiah in march 2014 might be useful.
>
> fxt
>
>
>
>
>
> > On Sep 29, 2016, at 2:08 AM, chenhl <chlcrazyboy at gmail.com> wrote:
> >
> > Dear all,
> >
> > I used star/test_suite/make_co_wd and star/test_suite/make_o_ne_wd to
> make CO and ONe WD models.  Normally, the CO or ONe WDs produced with these
> test suite cases are surrounded by a zone of unburnt material (i.e. He-rich
> or CO-rich material, respectively).  But I want to make 'pure' WD models,
> which do not have such unburnt material.  I have tried to adjust the
> initial mass and wind efficiency. But I still failed to make it. Is there
> anyone have experience on this?
> >
> >
> > Best wishes,
> > Hailiang
> >
> >
> >
> >
> > ------------------------------------------------------------
> ------------------
> > _______________________________________________
> > mesa-users mailing list
> > mesa-users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/mesa-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20160929/ea91fe4b/attachment.html>