[mesa-users] SE format

[Jean-Claude Passy]

Hi Amber,

may be I am missing something, but I don’t see anything wrong in your text file. I don’t know if you have noticed but ‘iso_massf’ is an array of size 4 (for H1, He4, C12, O16), that is why on the first line of your text file you get:

0.0, 0.924328611995849, 9.199726208188211E-4, 0.01579305044994838

Hope this helps!

Cheers,

JC

> On 16 Sep 2015, at 03:36, amber lauer <amberlauer at gmail.com> wrote:
> 
> Thanks for answering Jean-Claude, I have attached an example, both the h5 file and the text file. The three extra columns are not labeled, when I chose "export to file" hdfview only exports the data and not the column headers. I need ithe column label for my purposes, but unfortunately I don't have it for those three columns because they don't appear to exist in the hdf5 file. If they are extraneous and unused by nugrid, that would answer my question as well. I am exporting to text so I can share the data with some collaborators who are not involved in the computational aspect and maybe are not familiar with hdf5.
> 
> On Tue, Sep 15, 2015 at 3:46 AM, Jean-Claude Passy <jcpassy at gmail.com <mailto:jcpassy at gmail.com>> wrote:
> Hi Amber,
> 
> I have never tried to export a SE file to a text file. Can you be a little more specific? What are these 3 extra columns? Can you send me an example?
> Keep in mind that by exporting a SE file to a text file, you are defeating the purpose of using HDF5 format…
> 
> Cheers,
> 
> JC
> 
>> On 15 Sep 2015, at 04:41, Bill Paxton <paxton at kitp.ucsb.edu <mailto:paxton at kitp.ucsb.edu>> wrote:
>> 
>> Hi Amber,
>> 
>> The SE format is in MESA for use by Falk and the other NuGrid folks.  It isn't supported by the "mainline" mesa developers.  You are of course welcome to ask about SE on mesa-users, and you might even get answers from NuGrid users who are also on the list.
>> 
>> Good luck!
>> Bill
>> 
>> 
>> 
>> On Sep 14, 2015, at 7:36 PM, amber lauer wrote:
>> 
>>> I realize there are a limited number of people on the mailing list familiar with the SE format, but I'm a bit stumped. When I open one of the output h5 files with hdfview, and I export a dataset to txt file, there appear to be three extra columns that aren't there when viewed in hdfview. I looked at the SE support fortran files in the star folder, and there only seem to be routines for writing the vars that I can see in h5 format. Anyone know what is going on?
>>> 
>>> -- 
>>> Amber Lauer. M.S. Physics
>>> PhD Candidate,
>>> Graduate School of Physics,
>>> Louisiana State University
>>> ------------------------------------------------------------------------------
>>> _______________________________________________
>>> mesa-users mailing list
>>> mesa-users at lists.sourceforge.net <mailto:mesa-users at lists.sourceforge.net>
>>> https://lists.sourceforge.net/lists/listinfo/mesa-users <https://lists.sourceforge.net/lists/listinfo/mesa-users>
>> 
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> mesa-users mailing list
>> mesa-users at lists.sourceforge.net <mailto:mesa-users at lists.sourceforge.net>
>> https://lists.sourceforge.net/lists/listinfo/mesa-users <https://lists.sourceforge.net/lists/listinfo/mesa-users>
> 
> 
> 
> 
> -- 
> Amber Lauer. M.S. Physics
> PhD Candidate,
> Graduate School of Physics,
> Louisiana State University
> <SE_DATASET.txt><new.h5>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20150916/f2b2f566/attachment.html>