[mesa-users] MESA test suite case - wd_ignite
Francis Timmes
fxt44 at mac.com
Thu Mar 26 00:15:44 EDT 2015
1) say what you are trying to accomplish.
2) send your complete inlist(s) so someone could try to replicate issue.
3) say what version of mesa you are using.
until you complete these three items, there is not enough
information on the table to help you.
fxt
> On Mar 25, 2015, at 9:01 PM, Héctor MR <HEM52 at pitt.edu> wrote:
>
> Hi,
>
> Thanks! Basically, this is the part of my inlist &controls section which deals with the problem:
>
>
> report_why_dt_limits = .true.
>
> delta_lgL_nuc_limit = 0.5
>
> !delta_lgL_nuc_hard_limit = 0.5
>
> min_timestep_factor = 0.8d0
>
> power_nuc_burn_upper_limit = 1d15
>
> max_timestep = 1972350000
>
> varcontrol_target = 1d-3
> mesh_delta_coeff = 0.5
>
> logQ_limit = 1d6
> gamma_center_limit = 1d6
>
> photostep = 50
> profile_interval = 50
> history_interval = 10
> terminal_cnt = 10
> write_header_frequency = 10
>
> min_timestep_limit = 1d-8 ! seconds
>
> T_mix_limit = 1d4
>
>
> And, eventually, my terminal output shows that the variation in lg_Lnuc is bigger than the limit I established before (0.5). I do not understand my misconception regarding the command delta_lgL_nuc_limit. Lnuc is giving me problems regarding the time step and this is why I want to limit it.
>
> Thanks!
>
>
> __________________________________________________________________________________________________________________________________________________
>
> step lg_Tcntr Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf X_avg eta_cntr zones retry
> lg_dt_yr lg_Dcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf Y_avg gam_cntr iters bckup
> age_yr lg_Pcntr lg_L lg_LZ lg_Psurf lg_Dsurf C_core C_cntr Ne_cntr Si_cntr Z_avg v_div_cs dt_limit
> __________________________________________________________________________________________________________________________________________________
>
> 480 8.486869 2.618E+05 2.859290 3.126873 1.382237 0.000000 0.000000 0.000206 0.000000 0.000000 214.803526 1919 1
> 1.795872 9.535192 -2.586528 -29.955105 2.519596 -7.000000 0.000000 0.000000 0.618844 1.000000 0.000000 23.766144 4 0
> 3.8224E+06 27.397920 1.452514 2.789604 10.804753 -2.247950 1.382237 0.354695 0.019368 0.000662 1.000E+00 -0.519E-12 max_dt
>
> 490 8.521023 2.618E+05 3.635027 3.909948 1.382299 0.000000 0.000000 0.000279 0.000000 0.000000 198.563837 1898 1
> 1.795872 9.535305 -2.586601 -28.919191 3.114083 -7.000000 0.000000 0.000000 0.618800 1.000000 0.000000 21.980979 4 0
> 3.8230E+06 27.398142 1.452150 3.581138 10.804681 -2.247597 1.382299 0.353850 0.019502 0.000662 1.000E+00 0.693E-12 max_dt
>
> ------------------------------------------------------------------------------
> Dive into the World of Parallel Programming The Go Parallel Website, sponsored
> by Intel and developed in partnership with Slashdot Media, is your hub for all
> things parallel software development, from weekly thought leadership blogs to
> news, videos, case studies, tutorials and more. Take a look and join the
> conversation now. http://goparallel.sourceforge.net/_______________________________________________
> mesa-users mailing list
> mesa-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/mesa-users
More information about the Mesa-users
mailing list