[mesa-users] Question
Richard Townsend
townsend at astro.wisc.edu
Wed Jun 24 14:17:06 EDT 2015
Yes, the SDK is now installed, but you need other pieces of software installed, as listed in the pre-requisites table.
cheers,
Rich
> On Jun 24, 2015, at 1:10 PM, Liliana Novais <linovais at gmail.com> wrote:
>
> I thought that it was already installed, just done it... sorry I don't work on linux for 10 years
>
> 2015-06-24 19:06 GMT+01:00 Richard Townsend <townsend at astro.wisc.edu <mailto:townsend at astro.wisc.edu>>:
> You need to install the X11 and Z libraries, as listed in the pre-requisites table on the SDK website.
>
> While you’re reading this table, can I recommend you read everything else on the page. And then read it again!
>
>> On Jun 24, 2015, at 1:00 PM, Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>> wrote:
>>
>> I did all the steps again and after a long time it gave me this error:
>> run_star_extras.o run_star.o run.o -L../../make -lstar -L../../../lib -lionization -latm -lcolors -lmlt -lnse -lnet -leos -lkap -lrates -lneu -lchem -linterp_2d -linterp_1d -lnum -lf2crlibm -lcrlibm -lmtx -lconst -lutils -lmesaklu `mesasdk_lapack_link` `mesasdk_blas_link` `mesasdk_pgplot_link` `mesasdk_se_link`
>> /usr/bin/ld: cannot find -lX11
>> /usr/bin/ld: cannot find -lz
>> collect2: error: ld returned 1 exit status
>> makefile:33: recipe for target 'star' failed
>> make: *** [star] Error 1
>>
>> FAILED
>>
>>
>> /home/lnovais/Transferências/mesa/star/test
>> FAILED
>>
>>
>> /home/lnovais/Transferências/mesa/star
>> ./build_and_test FAILED
>>
>> where do I get x11 and lz????
>>
>> 2015-06-24 17:32 GMT+01:00 Richard Townsend <townsend at astro.wisc.edu <mailto:townsend at astro.wisc.edu>>:
>> You need to upgrade to the latest MESA — you are using an old version.
>>
>> Also, please subscribe to the MESA user’s mailing list here:
>>
>> https://lists.sourceforge.net/lists/listinfo/mesa-users <https://lists.sourceforge.net/lists/listinfo/mesa-users>
>>
>> (this stops your individual messages from having to be approved).
>>
>> cheers,
>>
>> Rich
>>
>>
>>> On Jun 24, 2015, at 11:22 AM, Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>> wrote:
>>>
>>> I started again and know I got the following error:
>>>
>>> /home/lnovais/mesasdk/trunk/utils
>>> building utils package.
>>>
>>> gfortran -fno-range-check -fopenmp -I../public -I../private -I../../include -Wunused-value -Werror -W -fimplicit-none -fbounds-check -O2 -g -c -ffree-form ../public/utils_def.f
>>> gfortran -fno-range-check -fopenmp -I../public -I../private -I../../include -Wunused-value -Werror -W -fimplicit-none -fbounds-check -O2 -g -c -ffree-form ../private/utils_isnan_okay.f
>>> ../private/utils_isnan_okay.f:43.36:
>>>
>>> is_real_inf = (2*x==x .and. x /= 0)
>>> 1
>>> Warning: Inequality comparison for REAL(4) at (1)
>>> ../private/utils_isnan_okay.f:43.24:
>>>
>>> is_real_inf = (2*x==x .and. x /= 0)
>>> 1
>>> Warning: Equality comparison for REAL(4) at (1)
>>> ../private/utils_isnan_okay.f:37.31:
>>>
>>> is_inf = (2*x==x .and. x /= 0)
>>> 1
>>> Warning: Inequality comparison for REAL(8) at (1)
>>> ../private/utils_isnan_okay.f:37.19:
>>>
>>> is_inf = (2*x==x .and. x /= 0)
>>> 1
>>> Warning: Equality comparison for REAL(8) at (1)
>>> makefile:42: recipe for target 'utils_isnan_okay.o' failed
>>> make: *** [utils_isnan_okay.o] Error 1
>>>
>>> /home/lnovais/mesasdk/trunk/utils/make
>>> FAILED
>>>
>>>
>>> /home/lnovais/mesasdk/trunk/utils
>>> ./build_and_test FAILED
>>>
>>>
>>> 2015-06-24 16:49 GMT+01:00 Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>>:
>>> I went to that site and downloaded it then I started to install
>>> following the steps I'm gointo to erase all and start again because I must had made a mistake somewhere
>>>
>>>
>>> 2015-06-24 16:43 GMT+01:00 Broxton Miles <bjmiles at crimson.ua.edu <mailto:bjmiles at crimson.ua.edu>>:
>>> Liliana,
>>>
>>> I just have to download it? or do I need to run it also?
>>>
>>> I followed the steps on this site:
>>> http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html <http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html>
>>>
>>>
>>> Yeah, you have to download it and install it/initialize it.
>>>
>>> I would say follow the instructions on the sdk site that pertain to your particular system:
>>>
>>> http://www.astro.wisc.edu/~townsend/static.php?ref=mesasdk#toc-Downloads <http://www.astro.wisc.edu/~townsend/static.php?ref=mesasdk#toc-Downloads>
>>>
>>> Try following those instructions and those of the official MESA page <http://mesa.sourceforge.net/prereqs.html> and then report back your results, and we'll go from there.
>>>
>>> Broxton
>>>
>>> On Wed, Jun 24, 2015 at 11:37 AM, Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>> wrote:
>>> I just have to download it? or do I need to run it also?
>>>
>>> I followed the steps on this site:
>>> http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html <http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html>
>>>
>>> 2015-06-24 16:34 GMT+01:00 Broxton Miles <bjmiles at crimson.ua.edu <mailto:bjmiles at crimson.ua.edu>>:
>>> Have you downloaded and initialized the mesasdk?
>>>
>>> The reason I ask is:
>>> make: gfortran: Command not found
>>>
>>> It can't find the compiler.
>>>
>>> Broxton
>>>
>>> On Wed, Jun 24, 2015 at 11:31 AM, Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>> wrote:
>>> Hello,
>>>
>>> I just was able to set the core number and there is another error on my installation:
>>>
>>> [lnovais at new-host MESA]$ ./install
>>> checking if ndiff is installed ...
>>> no! running install_ndiff
>>> ndiff installed in utils/ndiff/
>>>
>>> /home/lnovais/Programs/MESA/const
>>> building const package.
>>>
>>> gfortran -fno-range-check -fopenmp -I../public -I../private -I../../include -Wunused-value -Werror -W -fimplicit-none -O2 -c -ffixed-form -ffixed-line-length-132 ../public/const_def.f
>>> make: gfortran: Command not found
>>> makefile:26: recipe for target 'const_def.o' failed
>>> make: *** [const_def.o] Error 127
>>>
>>> /home/lnovais/Programs/MESA/const/make
>>> FAILED
>>>
>>>
>>> /home/lnovais/Programs/MESA/const
>>> ./build_and_test FAILED
>>>
>>>
>>> What is still missing?
>>>
>>> Thanks
>>> Liliana
>>>
>>> ------------------------------------------------------------------------------
>>> Monitor 25 network devices or servers for free with OpManager!
>>> OpManager is web-based network management software that monitors
>>> network devices and physical & virtual servers, alerts via email & sms
>>> for fault. Monitor 25 devices for free with no restriction. Download now
>>> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o <http://ad.doubleclick.net/ddm/clk/292181274;119417398;o>
>>> _______________________________________________
>>> mesa-users mailing list
>>> mesa-users at lists.sourceforge.net <mailto:mesa-users at lists.sourceforge.net>
>>> https://lists.sourceforge.net/lists/listinfo/mesa-users <https://lists.sourceforge.net/lists/listinfo/mesa-users>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Monitor 25 network devices or servers for free with OpManager!
>>> OpManager is web-based network management software that monitors
>>> network devices and physical & virtual servers, alerts via email & sms
>>> for fault. Monitor 25 devices for free with no restriction. Download now
>>> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o_______________________________________________ <http://ad.doubleclick.net/ddm/clk/292181274;119417398;o_______________________________________________>
>>> mesa-users mailing list
>>> mesa-users at lists.sourceforge.net <mailto:mesa-users at lists.sourceforge.net>
>>> https://lists.sourceforge.net/lists/listinfo/mesa-users <https://lists.sourceforge.net/lists/listinfo/mesa-users>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20150624/523a8c7b/attachment.html>
More information about the Mesa-users
mailing list