[mesa-users] Question

[Richard Townsend]

You need to install the X11 and Z libraries, as listed in the pre-requisites table on the SDK website. 

While you’re reading this table, can I recommend you read everything else on the page. And then read it again!

> On Jun 24, 2015, at 1:00 PM, Liliana Novais <linovais at gmail.com> wrote:
> 
> I did all the steps again and after a long time it gave me this error:
> run_star_extras.o run_star.o  run.o -L../../make -lstar -L../../../lib -lionization -latm -lcolors -lmlt -lnse -lnet -leos -lkap -lrates -lneu -lchem -linterp_2d -linterp_1d -lnum -lf2crlibm -lcrlibm -lmtx -lconst -lutils -lmesaklu `mesasdk_lapack_link` `mesasdk_blas_link` `mesasdk_pgplot_link` `mesasdk_se_link` 
> /usr/bin/ld: cannot find -lX11
> /usr/bin/ld: cannot find -lz
> collect2: error: ld returned 1 exit status
> makefile:33: recipe for target 'star' failed
> make: *** [star] Error 1
> 
> FAILED
> 
> 
> /home/lnovais/Transferências/mesa/star/test
> FAILED
> 
> 
> /home/lnovais/Transferências/mesa/star
> ./build_and_test FAILED
> 
> where do I get x11 and lz????
> 
> 2015-06-24 17:32 GMT+01:00 Richard Townsend <townsend at astro.wisc.edu <mailto:townsend at astro.wisc.edu>>:
> You need to upgrade to the latest MESA — you are using an old version.
> 
> Also, please subscribe to the MESA user’s mailing list here:
> 
> https://lists.sourceforge.net/lists/listinfo/mesa-users <https://lists.sourceforge.net/lists/listinfo/mesa-users>
> 
> (this stops your individual messages from having to be approved).
> 
> cheers,
> 
> Rich
> 
> 
>> On Jun 24, 2015, at 11:22 AM, Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>> wrote:
>> 
>> I started again and know I got the following error:
>> 
>> /home/lnovais/mesasdk/trunk/utils
>> building utils package.
>> 
>> gfortran -fno-range-check  -fopenmp  -I../public -I../private -I../../include -Wunused-value -Werror -W -fimplicit-none   -fbounds-check -O2 -g -c -ffree-form   ../public/utils_def.f
>> gfortran -fno-range-check  -fopenmp  -I../public -I../private -I../../include -Wunused-value -Werror -W -fimplicit-none   -fbounds-check -O2 -g -c -ffree-form   ../private/utils_isnan_okay.f
>> ../private/utils_isnan_okay.f:43.36:
>> 
>>          is_real_inf = (2*x==x .and. x /= 0)
>>                                     1
>> Warning: Inequality comparison for REAL(4) at (1)
>> ../private/utils_isnan_okay.f:43.24:
>> 
>>          is_real_inf = (2*x==x .and. x /= 0)
>>                         1
>> Warning: Equality comparison for REAL(4) at (1)
>> ../private/utils_isnan_okay.f:37.31:
>> 
>>          is_inf = (2*x==x .and. x /= 0)
>>                                1
>> Warning: Inequality comparison for REAL(8) at (1)
>> ../private/utils_isnan_okay.f:37.19:
>> 
>>          is_inf = (2*x==x .and. x /= 0)
>>                    1
>> Warning: Equality comparison for REAL(8) at (1)
>> makefile:42: recipe for target 'utils_isnan_okay.o' failed
>> make: *** [utils_isnan_okay.o] Error 1
>> 
>> /home/lnovais/mesasdk/trunk/utils/make
>> FAILED
>> 
>> 
>> /home/lnovais/mesasdk/trunk/utils
>> ./build_and_test FAILED
>> 
>> 
>> 2015-06-24 16:49 GMT+01:00 Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>>:
>> I went to that site and downloaded it then I started to install 
>> following the steps I'm gointo to erase all and start again because I must had made a mistake somewhere
>> 
>> 
>> 2015-06-24 16:43 GMT+01:00 Broxton Miles <bjmiles at crimson.ua.edu <mailto:bjmiles at crimson.ua.edu>>:
>> Liliana,
>> 
>> I just have to download it? or do I need to run it also?
>> 
>> I followed the steps on this site:
>> http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html <http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html>
>> 
>> 
>> Yeah, you have to download it and install it/initialize it.
>> 
>> I would say follow the instructions on the sdk site that pertain to your particular system:
>> 
>> http://www.astro.wisc.edu/~townsend/static.php?ref=mesasdk#toc-Downloads <http://www.astro.wisc.edu/~townsend/static.php?ref=mesasdk#toc-Downloads>
>> 
>> Try following those instructions and those of the official MESA page <http://mesa.sourceforge.net/prereqs.html> and then report back your results, and we'll go from there.
>> 
>> Broxton
>> 
>> On Wed, Jun 24, 2015 at 11:37 AM, Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>> wrote:
>> I just have to download it? or do I need to run it also?
>> 
>> I followed the steps on this site:
>> http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html <http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html>
>> 
>> 2015-06-24 16:34 GMT+01:00 Broxton Miles <bjmiles at crimson.ua.edu <mailto:bjmiles at crimson.ua.edu>>:
>> Have you downloaded and initialized the mesasdk?
>> 
>> The reason I ask is:
>> make: gfortran: Command not found
>> 
>> It can't find the compiler.
>> 
>> Broxton 
>> 
>> On Wed, Jun 24, 2015 at 11:31 AM, Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>> wrote:
>> Hello,
>> 
>> I just was able to set the core number and there is another error on my installation:
>> 
>> [lnovais at new-host MESA]$ ./install
>> checking if ndiff is installed ...
>> no! running install_ndiff
>> ndiff installed in utils/ndiff/
>> 
>> /home/lnovais/Programs/MESA/const
>> building const package.
>> 
>> gfortran -fno-range-check  -fopenmp  -I../public -I../private -I../../include -Wunused-value -Werror -W -fimplicit-none   -O2 -c -ffixed-form -ffixed-line-length-132 ../public/const_def.f
>> make: gfortran: Command not found
>> makefile:26: recipe for target 'const_def.o' failed
>> make: *** [const_def.o] Error 127
>> 
>> /home/lnovais/Programs/MESA/const/make
>> FAILED
>> 
>> 
>> /home/lnovais/Programs/MESA/const
>> ./build_and_test FAILED
>> 
>> 
>> What is still missing?
>> 
>> Thanks
>> Liliana
>> 
>> ------------------------------------------------------------------------------
>> Monitor 25 network devices or servers for free with OpManager!
>> OpManager is web-based network management software that monitors
>> network devices and physical & virtual servers, alerts via email & sms
>> for fault. Monitor 25 devices for free with no restriction. Download now
>> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o <http://ad.doubleclick.net/ddm/clk/292181274;119417398;o>
>> _______________________________________________
>> mesa-users mailing list
>> mesa-users at lists.sourceforge.net <mailto:mesa-users at lists.sourceforge.net>
>> https://lists.sourceforge.net/lists/listinfo/mesa-users <https://lists.sourceforge.net/lists/listinfo/mesa-users>
>> 
>> 
>> 
>> 
>> 
>> 
>> ------------------------------------------------------------------------------
>> Monitor 25 network devices or servers for free with OpManager!
>> OpManager is web-based network management software that monitors 
>> network devices and physical & virtual servers, alerts via email & sms 
>> for fault. Monitor 25 devices for free with no restriction. Download now
>> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o_______________________________________________ <http://ad.doubleclick.net/ddm/clk/292181274;119417398;o_______________________________________________>
>> mesa-users mailing list
>> mesa-users at lists.sourceforge.net <mailto:mesa-users at lists.sourceforge.net>
>> https://lists.sourceforge.net/lists/listinfo/mesa-users <https://lists.sourceforge.net/lists/listinfo/mesa-users>
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20150624/59f6a3c5/attachment.html>