[mesa-users] Question

[Richard Townsend]

You need to upgrade to the latest MESA — you are using an old version.

Also, please subscribe to the MESA user’s mailing list here:

https://lists.sourceforge.net/lists/listinfo/mesa-users

(this stops your individual messages from having to be approved).

cheers,

Rich

> On Jun 24, 2015, at 11:22 AM, Liliana Novais <linovais at gmail.com> wrote:
> 
> I started again and know I got the following error:
> 
> /home/lnovais/mesasdk/trunk/utils
> building utils package.
> 
> gfortran -fno-range-check  -fopenmp  -I../public -I../private -I../../include -Wunused-value -Werror -W -fimplicit-none   -fbounds-check -O2 -g -c -ffree-form   ../public/utils_def.f
> gfortran -fno-range-check  -fopenmp  -I../public -I../private -I../../include -Wunused-value -Werror -W -fimplicit-none   -fbounds-check -O2 -g -c -ffree-form   ../private/utils_isnan_okay.f
> ../private/utils_isnan_okay.f:43.36:
> 
>          is_real_inf = (2*x==x .and. x /= 0)
>                                     1
> Warning: Inequality comparison for REAL(4) at (1)
> ../private/utils_isnan_okay.f:43.24:
> 
>          is_real_inf = (2*x==x .and. x /= 0)
>                         1
> Warning: Equality comparison for REAL(4) at (1)
> ../private/utils_isnan_okay.f:37.31:
> 
>          is_inf = (2*x==x .and. x /= 0)
>                                1
> Warning: Inequality comparison for REAL(8) at (1)
> ../private/utils_isnan_okay.f:37.19:
> 
>          is_inf = (2*x==x .and. x /= 0)
>                    1
> Warning: Equality comparison for REAL(8) at (1)
> makefile:42: recipe for target 'utils_isnan_okay.o' failed
> make: *** [utils_isnan_okay.o] Error 1
> 
> /home/lnovais/mesasdk/trunk/utils/make
> FAILED
> 
> 
> /home/lnovais/mesasdk/trunk/utils
> ./build_and_test FAILED
> 
> 
> 2015-06-24 16:49 GMT+01:00 Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>>:
> I went to that site and downloaded it then I started to install 
> following the steps I'm gointo to erase all and start again because I must had made a mistake somewhere
> 
> 
> 2015-06-24 16:43 GMT+01:00 Broxton Miles <bjmiles at crimson.ua.edu <mailto:bjmiles at crimson.ua.edu>>:
> Liliana,
> 
> I just have to download it? or do I need to run it also?
> 
> I followed the steps on this site:
> http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html <http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html>
> 
> 
> Yeah, you have to download it and install it/initialize it.
> 
> I would say follow the instructions on the sdk site that pertain to your particular system:
> 
> http://www.astro.wisc.edu/~townsend/static.php?ref=mesasdk#toc-Downloads <http://www.astro.wisc.edu/~townsend/static.php?ref=mesasdk#toc-Downloads>
> 
> Try following those instructions and those of the official MESA page <http://mesa.sourceforge.net/prereqs.html> and then report back your results, and we'll go from there.
> 
> Broxton
> 
> On Wed, Jun 24, 2015 at 11:37 AM, Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>> wrote:
> I just have to download it? or do I need to run it also?
> 
> I followed the steps on this site:
> http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html <http://joaofariaresearch.weebly.com/1/post/2012/04/installing-mesa.html>
> 
> 2015-06-24 16:34 GMT+01:00 Broxton Miles <bjmiles at crimson.ua.edu <mailto:bjmiles at crimson.ua.edu>>:
> Have you downloaded and initialized the mesasdk?
> 
> The reason I ask is:
> make: gfortran: Command not found
> 
> It can't find the compiler.
> 
> Broxton 
> 
> On Wed, Jun 24, 2015 at 11:31 AM, Liliana Novais <linovais at gmail.com <mailto:linovais at gmail.com>> wrote:
> Hello,
> 
> I just was able to set the core number and there is another error on my installation:
> 
> [lnovais at new-host MESA]$ ./install
> checking if ndiff is installed ...
> no! running install_ndiff
> ndiff installed in utils/ndiff/
> 
> /home/lnovais/Programs/MESA/const
> building const package.
> 
> gfortran -fno-range-check  -fopenmp  -I../public -I../private -I../../include -Wunused-value -Werror -W -fimplicit-none   -O2 -c -ffixed-form -ffixed-line-length-132 ../public/const_def.f
> make: gfortran: Command not found
> makefile:26: recipe for target 'const_def.o' failed
> make: *** [const_def.o] Error 127
> 
> /home/lnovais/Programs/MESA/const/make
> FAILED
> 
> 
> /home/lnovais/Programs/MESA/const
> ./build_and_test FAILED
> 
> 
> What is still missing?
> 
> Thanks
> Liliana
> 
> ------------------------------------------------------------------------------
> Monitor 25 network devices or servers for free with OpManager!
> OpManager is web-based network management software that monitors
> network devices and physical & virtual servers, alerts via email & sms
> for fault. Monitor 25 devices for free with no restriction. Download now
> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o <http://ad.doubleclick.net/ddm/clk/292181274;119417398;o>
> _______________________________________________
> mesa-users mailing list
> mesa-users at lists.sourceforge.net <mailto:mesa-users at lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/mesa-users <https://lists.sourceforge.net/lists/listinfo/mesa-users>
> 
> 
> 
> 
> 
> 
> ------------------------------------------------------------------------------
> Monitor 25 network devices or servers for free with OpManager!
> OpManager is web-based network management software that monitors 
> network devices and physical & virtual servers, alerts via email & sms 
> for fault. Monitor 25 devices for free with no restriction. Download now
> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o_______________________________________________
> mesa-users mailing list
> mesa-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/mesa-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20150624/93e103b8/attachment.html>