[mesa-users] Installing MESA
Jared Brooks
brooksjaredc at gmail.com
Wed Apr 11 21:03:10 EDT 2012
Yeah I should have seen that. That fixed that problem, and a subsequent
problem was fixed by installing csh. I finally finished the installation
successfully. Thank you very much for your help.
-Jared
On Wed, Apr 11, 2012 at 5:06 PM, Richard Townsend
<townsend at astro.wisc.edu>wrote:
> Have you installed the X windows library (libx11-dev on Ubuntu), as
> specified in the prerequisites listed on the web page?
>
> You'll also have to install the Z library (libz-dev on Ubuntu).
>
> On Apr 11, 2012, at 7:01 PM, Jared Brooks wrote:
>
> Ok, I found out that running 'source /opt/mesasdk/bin/mesasdk_init.sh' is
> the key to allowing the install to run properly.
>
> However, I am still running into this problem:
>
> /home/jared/mesa/star
> building star package.
>
> make: `libstar.a' is up to date.
> make: `libstar.a' is up to date.
> gfortran -fno-range-check -fopenmp -o ../star \
> run_star_extras.o run_star.o run.o -L../../make -lstar -L../../../lib
> -ldiffusion -lionization -latm -lcolors -lmlt -leos -lkap -lnet -lscreen
> -lrates -lreaclib -lweak -lneu -lchem -linterp_2d -linterp_1d -lnum -lutils
> -lalert -lconst -lmtx -lmesaklu `mesasdk_lapack_link` `mesasdk_blas_link`
> `mesasdk_pgplot_link` `mesasdk_se_link`
> /usr/bin/ld: cannot find -lX11
> /usr/bin/ld: cannot find -lz
> collect2: error: ld returned 1 exit status
> make: *** [star] Error 1
>
> FAILED
>
>
> /home/jared/mesa/star/test
> FAILED
>
>
> /home/jared/mesa/star
> ./build_and_test FAILED
>
>
> Even though I have run the command 'export
> LD_RUN_PATH=/lib/x86_64-linux-gnu:/usr/lib/x86_64-linux-gnu' like its says
> in the FAQ
>
> -Jared
>
> On Wed, Apr 11, 2012 at 3:22 PM, Jared Brooks <brooksjaredc at gmail.com>wrote:
>
>> This time when I ran 'which gfortran' the output wasn't empty so I
>> thought I would try running ./install again and it seems to be running
>> successfully. I will let you know if I run into any more problems. Thanks
>> for your help.
>>
>> -Jared
>>
>>
>> On Wed, Apr 11, 2012 at 3:10 PM, Richard Townsend <
>> townsend at astro.wisc.edu> wrote:
>>
>>> Can you run *exactly* the following steps and send me the *exact* output:
>>>
>>> source /opt/mesasdk/bin/mesasdk_init.sh
>>> which gfortran
>>> echo $PATH
>>>
>>> On Apr 11, 2012, at 5:08 PM, Jared Brooks wrote:
>>>
>>> jared at ubuntu:~/mesa$ ./install
>>> checking if ndiff is installed ...
>>> yes!
>>>
>>> /home/jared/mesa/const
>>> building const package.
>>>
>>> gfortran -fno-range-check -fopenmp -I../public -I../private
>>> -I../../include -Wunused-value -Werror -W -fimplicit-none -O2 -c
>>> -ffixed-form -ffixed-line-length-132 ../public/const_def.f
>>> make: gfortran: Command not found
>>> make: *** [const_def.o] Error 127
>>>
>>> /home/jared/mesa/const/make
>>> FAILED
>>>
>>>
>>> /home/jared/mesa/const
>>> ./build_and_test FAILED
>>>
>>> jared at ubuntu:~/mesa$ which gfortran
>>> jared at ubuntu:~/mesa$ echo $MESASDK_ROOT
>>> /opt/mesasdk
>>> jared at ubuntu:~/mesa$ echo $PATH
>>>
>>> /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
>>>
>>>
>>> On Wed, Apr 11, 2012 at 3:02 PM, Richard Townsend <
>>> townsend at astro.wisc.edu> wrote:
>>>
>>>> OK, the script isn't supposed to produce any output. So, progress is
>>>> being made.
>>>>
>>>> When you say 'the same result', do you mean the 'gfortran: Command not
>>>> found error'? If so, please repeat these steps after you get the error:
>>>>
>>>> which gfortran
>>>>
>>>> echo $MESASDK_ROOT
>>>>
>>>> echo $PATH
>>>>
>>>> cheers,
>>>>
>>>> Rich
>>>>
>>>> On Apr 11, 2012, at 4:57 PM, Jared Brooks wrote:
>>>>
>>>> I can execute 'more mesasdk_init.sh', and I can even run the script
>>>> now, but it gives no output. Running ./install in /mesa still gives the
>>>> same result.
>>>>
>>>> -Jared
>>>>
>>>> On Wed, Apr 11, 2012 at 2:52 PM, Richard Townsend <
>>>> townsend at astro.wisc.edu> wrote:
>>>>
>>>>> OK, thanks. Are you still unable to execute 'more mesasdk_init.sh'?
>>>>>
>>>>> On Apr 11, 2012, at 4:50 PM, Jared Brooks wrote:
>>>>>
>>>>> jared at ubuntu:/opt/mesasdk/bin$ ls -l /opt/mesasdk/bin
>>>>> total 24536
>>>>> -rwxr-xr-x 4 500 500 2153392 2012-01-20 09:54 c++
>>>>> -rwxr-xr-x 1 500 500 2150346 2012-01-20 09:54 cpp
>>>>> -rwxr-xr-x 1 500 500 77266 2012-01-20 10:03 fpx3
>>>>> -rwxr-xr-x 1 500 500 2564 2012-01-20 10:03 fpx3_deps
>>>>> -rwxr-xr-x 4 500 500 2153392 2012-01-20 09:54 g++
>>>>> -rwxr-xr-x 3 500 500 2147774 2012-01-20 09:54 gcc
>>>>> -rwxr-xr-x 2 500 500 119881 2012-01-20 09:54 gcc-ar
>>>>> -rwxr-xr-x 2 500 500 119817 2012-01-20 09:54 gcc-nm
>>>>> -rwxr-xr-x 2 500 500 119837 2012-01-20 09:54 gcc-ranlib
>>>>> -rwxr-xr-x 1 500 500 1086658 2012-01-20 09:54 gcov
>>>>> -rwxr-xr-x 2 500 500 2160578 2012-01-20 09:54 gfortran
>>>>> -rwxr-xr-x 1 500 500 41082 2012-01-20 10:02 gif2h5
>>>>> -rwxr-xr-x 1 500 500 38244 2012-01-20 10:02 h52gif
>>>>> -rwxr-xr-x 1 500 500 12551 2012-01-20 10:02 h5cc
>>>>> -rwxr-xr-x 1 500 500 112948 2012-01-20 10:02 h5copy
>>>>> -rwxr-xr-x 1 500 500 19590 2012-01-20 10:02 h5debug
>>>>> -rwxr-xr-x 1 500 500 229329 2012-01-20 10:02 h5diff
>>>>> -rwxr-xr-x 1 500 500 197313 2012-01-20 10:02 h5dump
>>>>> -rwxr-xr-x 1 500 500 11693 2012-01-20 10:02 h5fc
>>>>> -rwxr-xr-x 1 500 500 79908 2012-01-20 10:02 h5import
>>>>> -rwxr-xr-x 1 500 500 35368 2012-01-20 10:02 h5jam
>>>>> -rwxr-xr-x 1 500 500 141757 2012-01-20 10:02 h5ls
>>>>> -rwxr-xr-x 1 500 500 111278 2012-01-20 10:02 h5mkgrp
>>>>> -rwxr-xr-x 1 500 500 69706 2012-01-20 10:02 h5perf_serial
>>>>> -rwxr-xr-x 1 500 500 4434 2012-01-20 10:02 h5redeploy
>>>>> -rwxr-xr-x 1 500 500 169697 2012-01-20 10:02 h5repack
>>>>> -rwxr-xr-x 1 500 500 15639 2012-01-20 10:02 h5repart
>>>>> -rwxr-xr-x 1 500 500 122193 2012-01-20 10:02 h5stat
>>>>> -rwxr-xr-x 1 500 500 32235 2012-01-20 10:02 h5unjam
>>>>> -rwxr-xr-x 1 500 500 1137 2012-01-20 10:03 mesasdk_arch_check.pl
>>>>> -rwxr-xr-x 1 500 500 71 2012-01-20 09:55 mesasdk_blas_link
>>>>> -rwxr-xr-x 1 500 500 89 2012-01-20 10:03 mesasdk_hdf5_link
>>>>> -rwxr-xr-x 1 500 500 835 2012-01-20 10:03 mesasdk_init.csh
>>>>> -rwxr-xr-x 1 500 500 611 2012-01-20 10:03 mesasdk_init.sh
>>>>> -rwxr-xr-x 1 500 500 101 2012-01-20 09:58 mesasdk_lapack95_link
>>>>> -rwxr-xr-x 1 500 500 95 2012-01-20 09:56 mesasdk_lapack_link
>>>>> -rwxr-xr-x 1 500 500 83 2012-01-20 09:58 mesasdk_pgplot_link
>>>>> -rwxr-xr-x 1 500 500 86 2012-01-20 10:03 mesasdk_se_link
>>>>> -rwxr-xr-x 2 500 500 42426 2012-01-20 10:03 ndiff
>>>>> -rwxr-xr-x 2 500 500 42426 2012-01-20 10:03 ndiff-2.00
>>>>> -rwxr-xr-x 1 500 500 12512 2012-01-20 10:03 touchse
>>>>> -rwxr-xr-x 4 500 500 2153392 2012-01-20 09:54 x86_64-pc-linux-gnu-c++
>>>>> -rwxr-xr-x 4 500 500 2153392 2012-01-20 09:54 x86_64-pc-linux-gnu-g++
>>>>> -rwxr-xr-x 3 500 500 2147774 2012-01-20 09:54 x86_64-pc-linux-gnu-gcc
>>>>> -rwxr-xr-x 3 500 500 2147774 2012-01-20 09:54
>>>>> x86_64-pc-linux-gnu-gcc-4.7.0
>>>>> -rwxr-xr-x 2 500 500 119881 2012-01-20 09:54
>>>>> x86_64-pc-linux-gnu-gcc-ar
>>>>> -rwxr-xr-x 2 500 500 119817 2012-01-20 09:54
>>>>> x86_64-pc-linux-gnu-gcc-nm
>>>>> -rwxr-xr-x 2 500 500 119837 2012-01-20 09:54
>>>>> x86_64-pc-linux-gnu-gcc-ranlib
>>>>> -rwxr-xr-x 2 500 500 2160578 2012-01-20 09:54
>>>>> x86_64-pc-linux-gnu-gfortran
>>>>>
>>>>>
>>>>> Here's the file I unpacked into /opt:
>>>>> mesasdk-x86_64-linux-20120120.tar.gz
>>>>>
>>>>>
>>>>> On Wed, Apr 11, 2012 at 2:48 PM, Richard Townsend <
>>>>> townsend at astro.wisc.edu> wrote:
>>>>>
>>>>>> Please could you send the new 'ls -l', and also let me know the
>>>>>> actual name of the file you unpacked into /opt.
>>>>>>
>>>>>> cheers,
>>>>>>
>>>>>> Rich
>>>>>>
>>>>>> On Apr 11, 2012, at 4:46 PM, Jared Brooks wrote:
>>>>>>
>>>>>> I changed those permissions, and those changes were reflected by a ls
>>>>>> -l, but it is still denying me permission.
>>>>>>
>>>>>> I downloaded the Linux 64 bit SDK from this page:
>>>>>> http://www.astro.wisc.edu/~townsend/static.php?ref=mesasdk
>>>>>>
>>>>>> -Jared
>>>>>>
>>>>>> On Wed, Apr 11, 2012 at 2:37 PM, Richard Townsend <
>>>>>> townsend at astro.wisc.edu> wrote:
>>>>>>
>>>>>>> As root user, execute the following:
>>>>>>>
>>>>>>> chmod 755 /opt/mesasdk/bin/mesasdk_init.csh
>>>>>>> chmod 755 /opt/mesasdk/bin/mesasdk_init.sh
>>>>>>>
>>>>>>> I'm not sure what led to this problem; what version of the SDK are
>>>>>>> you using (i.e., what file did you download)?
>>>>>>>
>>>>>>> cheers,
>>>>>>>
>>>>>>> Rich
>>>>>>>
>>>>>>> On Apr 11, 2012, at 4:34 PM, Jared Brooks wrote:
>>>>>>>
>>>>>>> jared at ubuntu:/opt/mesasdk/bin$ ls -l /opt/mesasdk/bin
>>>>>>> total 24536
>>>>>>> -rwxr-xr-x 4 500 500 2153392 2012-01-20 09:54 c++
>>>>>>> -rwxr-xr-x 1 500 500 2150346 2012-01-20 09:54 cpp
>>>>>>> -rwxr-xr-x 1 500 500 77266 2012-01-20 10:03 fpx3
>>>>>>> -rwxr-xr-x 1 500 500 2564 2012-01-20 10:03 fpx3_deps
>>>>>>> -rwxr-xr-x 4 500 500 2153392 2012-01-20 09:54 g++
>>>>>>> -rwxr-xr-x 3 500 500 2147774 2012-01-20 09:54 gcc
>>>>>>> -rwxr-xr-x 2 500 500 119881 2012-01-20 09:54 gcc-ar
>>>>>>> -rwxr-xr-x 2 500 500 119817 2012-01-20 09:54 gcc-nm
>>>>>>> -rwxr-xr-x 2 500 500 119837 2012-01-20 09:54 gcc-ranlib
>>>>>>> -rwxr-xr-x 1 500 500 1086658 2012-01-20 09:54 gcov
>>>>>>> -rwxr-xr-x 2 500 500 2160578 2012-01-20 09:54 gfortran
>>>>>>> -rwxr-xr-x 1 500 500 41082 2012-01-20 10:02 gif2h5
>>>>>>> -rwxr-xr-x 1 500 500 38244 2012-01-20 10:02 h52gif
>>>>>>> -rwxr-xr-x 1 500 500 12551 2012-01-20 10:02 h5cc
>>>>>>> -rwxr-xr-x 1 500 500 112948 2012-01-20 10:02 h5copy
>>>>>>> -rwxr-xr-x 1 500 500 19590 2012-01-20 10:02 h5debug
>>>>>>> -rwxr-xr-x 1 500 500 229329 2012-01-20 10:02 h5diff
>>>>>>> -rwxr-xr-x 1 500 500 197313 2012-01-20 10:02 h5dump
>>>>>>> -rwxr-xr-x 1 500 500 11693 2012-01-20 10:02 h5fc
>>>>>>> -rwxr-xr-x 1 500 500 79908 2012-01-20 10:02 h5import
>>>>>>> -rwxr-xr-x 1 500 500 35368 2012-01-20 10:02 h5jam
>>>>>>> -rwxr-xr-x 1 500 500 141757 2012-01-20 10:02 h5ls
>>>>>>> -rwxr-xr-x 1 500 500 111278 2012-01-20 10:02 h5mkgrp
>>>>>>> -rwxr-xr-x 1 500 500 69706 2012-01-20 10:02 h5perf_serial
>>>>>>> -rwxr-xr-x 1 500 500 4434 2012-01-20 10:02 h5redeploy
>>>>>>> -rwxr-xr-x 1 500 500 169697 2012-01-20 10:02 h5repack
>>>>>>> -rwxr-xr-x 1 500 500 15639 2012-01-20 10:02 h5repart
>>>>>>> -rwxr-xr-x 1 500 500 122193 2012-01-20 10:02 h5stat
>>>>>>> -rwxr-xr-x 1 500 500 32235 2012-01-20 10:02 h5unjam
>>>>>>> -rwxr-xr-x 1 500 500 1137 2012-01-20 10:03 mesasdk_arch_check.pl
>>>>>>> -rwxr-xr-x 1 500 500 71 2012-01-20 09:55 mesasdk_blas_link
>>>>>>> -rwxr-xr-x 1 500 500 89 2012-01-20 10:03 mesasdk_hdf5_link
>>>>>>> -rwxrwx--- 1 500 500 835 2012-01-20 10:03 mesasdk_init.csh
>>>>>>> -rwxrwx--- 1 500 500 611 2012-01-20 10:03 mesasdk_init.sh
>>>>>>> -rwxr-xr-x 1 500 500 101 2012-01-20 09:58 mesasdk_lapack95_link
>>>>>>> -rwxr-xr-x 1 500 500 95 2012-01-20 09:56 mesasdk_lapack_link
>>>>>>> -rwxr-xr-x 1 500 500 83 2012-01-20 09:58 mesasdk_pgplot_link
>>>>>>> -rwxr-xr-x 1 500 500 86 2012-01-20 10:03 mesasdk_se_link
>>>>>>> -rwxr-xr-x 2 500 500 42426 2012-01-20 10:03 ndiff
>>>>>>> -rwxr-xr-x 2 500 500 42426 2012-01-20 10:03 ndiff-2.00
>>>>>>> -rwxr-xr-x 1 500 500 12512 2012-01-20 10:03 touchse
>>>>>>> -rwxr-xr-x 4 500 500 2153392 2012-01-20 09:54 x86_64-pc-linux-gnu-c++
>>>>>>> -rwxr-xr-x 4 500 500 2153392 2012-01-20 09:54 x86_64-pc-linux-gnu-g++
>>>>>>> -rwxr-xr-x 3 500 500 2147774 2012-01-20 09:54 x86_64-pc-linux-gnu-gcc
>>>>>>> -rwxr-xr-x 3 500 500 2147774 2012-01-20 09:54
>>>>>>> x86_64-pc-linux-gnu-gcc-4.7.0
>>>>>>> -rwxr-xr-x 2 500 500 119881 2012-01-20 09:54
>>>>>>> x86_64-pc-linux-gnu-gcc-ar
>>>>>>> -rwxr-xr-x 2 500 500 119817 2012-01-20 09:54
>>>>>>> x86_64-pc-linux-gnu-gcc-nm
>>>>>>> -rwxr-xr-x 2 500 500 119837 2012-01-20 09:54
>>>>>>> x86_64-pc-linux-gnu-gcc-ranlib
>>>>>>> -rwxr-xr-x 2 500 500 2160578 2012-01-20 09:54
>>>>>>> x86_64-pc-linux-gnu-gfortran
>>>>>>> jared at ubuntu:/opt/mesasdk/bin$ more mesasdk_init.sh
>>>>>>> mesasdk_init.sh: Permission denied
>>>>>>>
>>>>>>> It looks like I should be able to access all these files, but for
>>>>>>> some reason it's still keeping me out
>>>>>>>
>>>>>>> -Jared
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Apr 11, 2012 at 2:30 PM, Richard Townsend <
>>>>>>> townsend at astro.wisc.edu> wrote:
>>>>>>>
>>>>>>>> Could you post the output from 'ls -l /opt/mesasdk/bin'. That will
>>>>>>>> show what permission problems may exist.
>>>>>>>>
>>>>>>>> On Apr 11, 2012, at 4:27 PM, Jared Brooks wrote:
>>>>>>>>
>>>>>>>> Here's a command I found concerning PATH in my .profile:
>>>>>>>>
>>>>>>>> # set PATH so it includes user's private bin if it exists
>>>>>>>> if [ -d "$HOME/bin" ] ; then
>>>>>>>> PATH="$HOME/bin:$PATH"
>>>>>>>> fi
>>>>>>>>
>>>>>>>> And here's the output to that source command:
>>>>>>>>
>>>>>>>> jared at ubuntu:~/mesa$ source $MESASDK_ROOT/bin/mesasdk_init.sh
>>>>>>>> bash: /opt/mesasdk/bin/mesasdk_init.sh: Permission denied
>>>>>>>>
>>>>>>>> I've had a hunch that permissions were at the source of my
>>>>>>>> problems, but I still don't understand why it's keeping me out.
>>>>>>>>
>>>>>>>> -Jared
>>>>>>>>
>>>>>>>> On Wed, Apr 11, 2012 at 2:20 PM, Richard Townsend <
>>>>>>>> townsend at astro.wisc.edu> wrote:
>>>>>>>>
>>>>>>>>> OK, thanks. Please post the output when you run
>>>>>>>>>
>>>>>>>>> source $MESASDK_ROOT/bin/mesasdk_init.sh
>>>>>>>>>
>>>>>>>>> Also, please confirm that you don't have anything else in your
>>>>>>>>> .profile startup script which overwrites the PATH environment variable.
>>>>>>>>>
>>>>>>>>> cheers,
>>>>>>>>>
>>>>>>>>> Rich
>>>>>>>>>
>>>>>>>>> On Apr 11, 2012, at 4:17 PM, Jared Brooks wrote:
>>>>>>>>>
>>>>>>>>> jared at ubuntu:~/mesa$ which gfortran
>>>>>>>>> jared at ubuntu:~/mesa$ echo $MESASDK_ROOT
>>>>>>>>> /opt/mesasdk
>>>>>>>>> jared at ubuntu:~/mesa$ echo $PATH
>>>>>>>>>
>>>>>>>>> /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
>>>>>>>>>
>>>>>>>>> -Jared
>>>>>>>>>
>>>>>>>>> On Wed, Apr 11, 2012 at 2:14 PM, Richard Townsend <
>>>>>>>>> townsend at astro.wisc.edu> wrote:
>>>>>>>>>
>>>>>>>>>> After you get the 'make: gfortran: Command not found', please run
>>>>>>>>>> the following commands and post the output:
>>>>>>>>>>
>>>>>>>>>> which gfortran
>>>>>>>>>>
>>>>>>>>>> echo $MESASDK_ROOT
>>>>>>>>>>
>>>>>>>>>> echo $PATH
>>>>>>>>>>
>>>>>>>>>> cheers,
>>>>>>>>>>
>>>>>>>>>> Rich
>>>>>>>>>>
>>>>>>>>>> On Apr 11, 2012, at 4:10 PM, Jared Brooks wrote:
>>>>>>>>>>
>>>>>>>>>> I have had these commands in my .profile
>>>>>>>>>>
>>>>>>>>>> export MESASDK_ROOT=/opt/mesasdk
>>>>>>>>>> source $MESASDK_ROOT/bin/mesasdk_init.sh
>>>>>>>>>> export OMP_NUM_THREADS=4
>>>>>>>>>> export LIBRARY_PATH=/usr/lib/x86_64-linux-gnu
>>>>>>>>>> export LD_RUN_PATH=/lib/x86_64-linux-gnu:/usr/lib/x86_64-linux-gnu
>>>>>>>>>>
>>>>>>>>>> -Jared
>>>>>>>>>>
>>>>>>>>>> On Wed, Apr 11, 2012 at 1:53 PM, Richard Townsend <
>>>>>>>>>> townsend at astro.wisc.edu> wrote:
>>>>>>>>>>
>>>>>>>>>>> Have you initialized the SDK properly using the appropriate
>>>>>>>>>>> script? You have to do this each time you log in -- or add a line to your
>>>>>>>>>>> start-up file (.cshrc, .bashrc, etc.)
>>>>>>>>>>>
>>>>>>>>>>> On Apr 11, 2012, at 3:33 PM, Jared Brooks wrote:
>>>>>>>>>>>
>>>>>>>>>>> > Hello, I'm running Ubuntu and I can't get MESA installed
>>>>>>>>>>> completely. I'm using the MESA_SDK and I followed the FAQ, yet I'm still
>>>>>>>>>>> stuck. I got the install script to run for a few hours before it stopped
>>>>>>>>>>> and now will only give me this:
>>>>>>>>>>> >
>>>>>>>>>>> > jared at ubuntu:~/mesa$ ./install
>>>>>>>>>>> > checking if ndiff is installed ...
>>>>>>>>>>> > yes!
>>>>>>>>>>> >
>>>>>>>>>>> > /home/jared/mesa/const
>>>>>>>>>>> > building const package.
>>>>>>>>>>> >
>>>>>>>>>>> > gfortran -fno-range-check -fopenmp -I../public -I../private
>>>>>>>>>>> -I../../include -Wunused-value -Werror -W -fimplicit-none -O2 -c
>>>>>>>>>>> -ffixed-form -ffixed-line-length-132 ../public/const_def.f
>>>>>>>>>>> > make: gfortran: Command not found
>>>>>>>>>>> > make: *** [const_def.o] Error 127
>>>>>>>>>>> >
>>>>>>>>>>> > /home/jared/mesa/const/make
>>>>>>>>>>> > FAILED
>>>>>>>>>>> >
>>>>>>>>>>> >
>>>>>>>>>>> > /home/jared/mesa/const
>>>>>>>>>>> > ./build_and_test FAILED
>>>>>>>>>>> >
>>>>>>>>>>> >
>>>>>>>>>>> > And I found this message in the file mesa/const/test/tmp.txt:
>>>>>>>>>>> >
>>>>>>>>>>> > ./tester: error while loading shared libraries:
>>>>>>>>>>> libgfortran.so.3: cannot open shared object file: No such file or directory
>>>>>>>>>>> >
>>>>>>>>>>> > I found the file libgfortran.so.3 in /opt/mesasdk/lib64/, it
>>>>>>>>>>> seems to be just a pointer to libgfortran.so.3.0.0.
>>>>>>>>>>> >
>>>>>>>>>>> > -Jared
>>>>>>>>>>> >
>>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>>> > Better than sec? Nothing is better than sec when it comes to
>>>>>>>>>>> > monitoring Big Data applications. Try Boundary one-second
>>>>>>>>>>> > resolution app monitoring today. Free.
>>>>>>>>>>> >
>>>>>>>>>>> http://p.sf.net/sfu/Boundary-dev2dev_______________________________________________
>>>>>>>>>>> > mesa-users mailing list
>>>>>>>>>>> > mesa-users at lists.sourceforge.net
>>>>>>>>>>> > https://lists.sourceforge.net/lists/listinfo/mesa-users
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.mesastar.org/pipermail/mesa-users/attachments/20120411/f6771e97/attachment.html>
More information about the Mesa-users
mailing list